Pfaff 1295 User Manual

Setting up
9 - 1
9 Setting up
All instructions and regulations in this instruction manual must be observed.
Special attention must be given to all safety regulations!
All setting-up work must only be done by personnel with the necessary train-
ing. For all setting-up work the machine must be isolated from its power supply
by turning off the on/off switch or removing the machine plug from the electric
power socket!
9.01 Inserting the needle on the bei der PFAFF 1295
Switch the machine off!
Danger due to unintentional
starting of the machine!
Only use needles from the
system intended for the
machine, see Chapter 3
Specifications.
● Set needle bar at top position and loosen
screw 1.
● Push needle 2 fully in (the long needle
groove must face to the left).
● Tighten screw 1 again.
The choice of needle depends on the version of the machine and the sewing
thread and material in use (see Chapter 3, Specifications).
Fig. 9 - 01
1
2

Pfaff 1295 Specifications

General

Brand	Pfaff
Model	1295
Category	Sewing Machine
Language	English