Pfaff 1295 User Manual

Setting up
9 - 4
Removing the bobbin case:
● Set the take-up lever at its highest point.
● Remove the post cover, lift latch 1 and
take out bobbin case 2.
Inserting the bobbin case:
● Insert bobbin case 2 so that you feel it
snap in place.
● Push latch 1 down and close the post
cover.
Do not run the machine with the post cover open!
Danger of injury by moving parts!
9.04 Changing the bobbin
Fig. 9 - 04
Switch the machine off!
Danger due to unintentional
starting of the machine!
1
2
Fig. 9 - 05
9.05 Threading the bobbin thread and regulating the bobbin thread tension
Switch off the machine!
Danger of injury due to
unintentional starting of the
machine!
● Thread the bobbin as shown in Fig. 9-05.
● When the thread is pulled, the bobbin
must rotate as shown by the arrow.
● Regulate the bobbin thread tension on
srew 1.
5 cm
1
+
-

Pfaff 1295 Specifications

General

Brand	Pfaff
Model	1295
Category	Sewing Machine
Language	English