Pfaff 238-0 User Manual

Machine Feeds improperly
Cause:
1. Feed dog set too low.
2. Feed teeth too fine for the material.
3. Feed dog unsuitable for the work to be performed.
4. Incorrect pressure on material.
5. Accumulations of packed lint between feed teeth.
6. Blunt feed points.
Overheating
Cause:
1. No oil In reservoir.
2. V-belt too tight, causing excessive pressure on arm shaft bearings.
3. Full weight of motor pulls down V-belt because belt take-up hanger has come loose.
35
From the library of: Superior Sewing Machine & Supply LLC

Pfaff 238-0 Specifications

General

Brand	Pfaff
Model	238-0
Category	Sewing Machine
Language	English