Pfaff 238-0 User Manual

29. Adjusting the Stitdi Length for Forward and Reverse Sewing
Pfaff 238 machines normally are set to make stitches of exactly the same length, regard
less whether they sew forward or backward. This feature will be much appreciated be
cause the needle, In backtacking the end of a seam, will stitch into the same holes
which were made in forward sewing.
To change the relative stitch lengths in forward and backward sewing, loosen clamping
screw N In the feed regulator slot (Fig. 35), hold feed regulator lever A steady and ad
just the length of forward stitches by turning crank 0 on Its shaft, as appropriate. Turn
crank O upwards for longer stitches, or downwards, for shorter stitches.
In this way, the stitch length relationship of forward and backward stitches can be re
gulated, as desired. After the adjustment, tighten clamping screw N securely.
R 5092
Fig. 35
From the library of: Superior Sewing Machine & Supply LLC

Pfaff 238-0 Specifications

General

Brand	Pfaff
Model	238-0
Category	Sewing Machine
Language	English