Pfaff 238-0 User Manual

Balance
Whppj nip.
Motor Speed 2,800
r.p.m.
Motor Speed 3,400 r.p.m.
dm
mm
D
mm
dm
mm
Motor
D
mm
Pulley Dia.
Order
No.
Stitches
per
Minute
dm
mm
Motor Pulley Dia.
D Order
mm No.
Stitdies
per
Minute
71 76 63 68
16-437 010-55 2,500 -
-
-
71 76
67
72 16-437 020-55 2,600 - - -
-
71 76 71 76 16-437 030-55 2,800 -
- -
-•
71 76 75 80 16-437 040-55 3,000 63
68 16-437 010-55
3,000
71 76
80 85 16-437 050-55 3,200
67 72 16-437 020-55 3,200
71
76 85 90 16-437 060-55 3,400
71
76
16-437 030-55
3,400
71 76
90 95 16-437 070-55 3,600 75 80
16-437 040-55
3.600
71 76 95
100
16-437 080-55
3,800
80 85 16-437 050-55 3,800
dfn ~ effective diameter 0 = outside diameter
63 mm
= 2.48", 72 mm = 2.83", 85 mm = 3,35",
67 mm = 2.64",
75 mm = 2.95", 90 mm = 3.54",
68 mm = 2.67",
76 mm = 3.00",
95 mm = 3.74",
71 mm = 2.79",
80 mm = 3.15", 100 mm = 3.94".
dm
- 0 Fig. 2
Unpack the sewing head cautiously to avoid damage to the machine. After removing the
lid from the box, unscrew the wood screws which hold the cushioned wooden blocks
that support the machine in the box. Cautiously lift the machine out of the box, wipe off
the dust and mount the machine on the table so that it rests on the rubber pads.
To facilitate the mounting of the V-belt, slip it on the machine pulley first. Then slightly
lift the motor and pull the belt onto the motor pulley.
For adjusting the V-belt tension, please refer to the instructions which are furnished with
the motor.
The machine is dispatched without oil in the reservoir and must not be run while in
this condition.
From the library of: Superior Sewing Machine & Supply LLC

Pfaff 238-0 Specifications

General

Brand	Pfaff
Model	238-0
Category	Sewing Machine
Language	English