Pfaff creative 1472

JH
5-6
Needle:
100
or 130
H-N
Needle thread buttonhole
thread
Stitch length:
longest
stitch
Top-stitch
seams produce nice
ornamental
effects. For
this, selection of
a
suitable
thread is
important.
To Obtain particularly
prominent
seams, we recommend
using buttonhole
thread.
Buttonhole thread
as
bobbin thread
r
prog
-- f
((3
[]
00
HT
Buttonhole thread can also
be
wound on the
bob
bin and used as bobbin thread In this case,
sewing thread should
be used in the
needle.
For
this sewing
job
the needle thread tension must
be
set
relatively high. For topstitching, the fabric is
placed in
the
machine wrong side up. Select the
longest stitch. For topstitching,
a
No.
80
needle
may
be used
• For difficult
top-stitch
seams we recommend
using the
straight-stitch foot and the round-
hole needle plate (special accessory).
• Before
you
fit these, set the needle
at
its
middle position.
It
is not possible
to select a
program now.
To
select another program press
the key
twin
nedle’ again
52
Top-stitch
seams sewn with
two needle threads
progfZ
J
W
ii
1
00
I-I
OA
Stitch
length:
6.0
mm
Needle:
80
Thread: sewing thread
If
you
cannot find a suitable buttonhole
thread for
specific sewing
work,
try using two
needle
threads together. Place
one
thread to
the right,
and the
other
to the left
of
disc “C”, (see page 96)
and
insert
both threads
In
the needle eye.
Triple-fancy-stitch seams
EEEZEFLIEHZfr
Stitch length: 6.0 mm
Needle:
80
Thread: sewing thread
• This stitch can
be used without any difficulty
for sewing a top-stitch seam along lapel
and
pocket edges or
sewing
an ornamental seam.
For this, normal sewing thread
is used.
Twin-needle top-stitch
seams
FTThHH
E
Needle: twin needle,
needle
gauge, as desired
The twin needle
can be
used
not only for
embroi
dery work, but also for
top-stitching. It produces
a
particularly
attractive effect
along hem edges and
on facings.
Fold the bottom
edge, the facing or border
edge
over to the wrong side and
baste it down. Sew on
the right side of
the fabric with the twin needle.
Trim
away
the
excess
material
on the
wrong
side.
(For threading instructions
see page
96),
Through
adjustment
of the
needle
(needle
posi
tion),
certain
sewing
work
can
be carried
out
easier.
For
example, if
you wish
to stitch
at
a
nar
row
margin
such
as on
collars or
when
inserting
zippers,
you
select
the
required
needle
position.
• For
changing
the
needle
position, the
needle
must
always
be in
the
highest
position.
Left
needle
position
Program:
01
The left
needle
position
is
also shown
by the sym
bol
E
to the left
of
the
stitch width
number in
the
display.
With
key
8 + the
needle
position
can
be
changed
from
left
to right
for 19
different
posi
tions.
The right
needle
position is
shown
by the
sym
bol
)
to the
right of
the
stitch width
number in
the
display
(Fig. 1).
2
Change
of
needle
position
with
zigzag
stitch
•
The
needle
must
always
be in
the highest
posi
lion.
Right
needle
position
e.g.
Program:
11
Stitch
width,
as
required
Stitch
length:
as required
Left
needle
position
Program:
11
Stitch
width:
as
required
Stitch
length:
as
required
Key:
Pattern
mirror
28
With
the
above-mentioned
settings,
the
stored
zigzag-program
can
be sewn with
left or
right zig
zag
throw. For
an
intermediate
needle
position,
stitch wi’
“nv
8 is pressed
repeatedly
until the
needle
i’
‘‘4
starting
position
(Fig.
2 +
2a).
I
Top-stitch
seams
Buttonhole thread
as
needle thread
(9
(-)
0,
DD
I
I
I
I
Change
of
needle
position
with
straight
stitch
F
F
55
4
4