Pfaff creative 1472 User Manual

7
Winding from a second
spool:
Swing
bobbin winder thread guide
44
to the
front Pull the thread into guide
40, into
bobbin winder tension A and
around
finger B Now pass the thread
to
bobbin
winder
25
and
wind it
a
few
times
clockwise around
the bobbin
Press the bobbin to the
right Then
turn on the main
switch,
press
the
foot
control and
wind
the
bobbin. Press the
full bobbin
to
the left and
cut
the
thread
using
thread cutter 37.
Bobbins
are wound in the same
way
from reel holder 45
Important:
If an empty M-memory
is
selected, it
is not possible to
wind the
bobbin A program between 00
and
99
must
be selected.
If
the
spool has a
thread slot, the slot
must face to the
right when the
spool
is placed on
Winding
through
the
needle
Only
with
metal
sewing
foot!
Swing
bobbin
winder
thread
guide
44
to the
front
Raise
sewing
foot.
Switch
on
the dual
feed.
Set
needle
at
foB position.
Place
bobbin
on bobbin
winder
25. Disen
gage
sewing
action.
Pull
the
needle
thread
under
the
sewing
foot
to
the
right
and
through
guide
44
(into
open
ng
A
and
around
finger
B,
see illustra
tion).
Wind
the
thread
a few
times
clockwise
around the
bobbin
and
press it
to the right
Then
turn
on
the
main
switch,
press
the
foot
control
and
wind
the
bobbin.
Push
the full
bobbin
to the
left,
remove
it and
cut the
thread
using
thread
cutter 37
Important: If
an empty
M-memory
is
selected,
it
is not
possible
to wind
the
bobbin. A
program
between
00
and
99
must
he
selected.
Engaging
the
sewing
action:
hold
the
hand
wheel firmly
and
lurn
disc
4
to
the rear
Then
turn the
hand
wheel
to
tefrontuntildengages
-
15
€1
14
(gaging
the
sewing action:
hold the
hand wheel firmly and
turn
disc 4 to
the
rear Then turn the
hand wheel
to
the
front until
it engages.
-

Pfaff creative 1472 Specifications

General

Brand	Pfaff
Model	creative 1472
Category	Sewing Machine
Language	English