Pfaff hobby 1142 - Adjustment of Buttonhole Feed Balance - the Colums

(E)
(G)
(C)
(D)
(A) (B)
104 72 62-26 21
Adjustment of buttonhole feed balance - The colums
Requirements
When sewing a buttonhole, the stitches on each side of the buttonhole should be the same density.
Check
• Select the bartrack on the Buttonhole indication
• Attach the buttonhole foot (R).
• Sew a buttonhole.
• The stitches on each side of the buttonhole should be of the same stitch density.
Adjustment
• Remove the cap (E).
• If the left row is denser (A), turn the adjusting screw (G) in the direction (C).
If the right row is denser (B), turn the adjusting screw (G) in the direction (D).
• Attach the cap (E).