Pfaff hobby GrandQuilter 1200 - Transformer and Machine Socket Replacement; Replace Transformer; Replace Machine Socket

(A)
(B)
(C)
(A)
r
(B)
(A)
(B)
(C)
(D)
104 72 63-26 35
Replace the transformer
• Remove the top cover and motor cover.
• Remove the board-A case lid and pull out the transformer connectors (primary and secondary) from the circuit
board-A. Removing instructions see ”Replace the Circuit Board-A”
• Remove the driving motor.
Removing instructions see ”Replace the motor and Adjust the motor belt tension”
• Remove the setscrew (A) and cord binder (B).
• Remove the setscrews (C) and transformer .
• To attach: follow the above procedure in reverse.
Replace the Machine Socket
• Remove the top cover, belt cover and motor cover.
• Remove the board-A case lid and pull out the machine socket connectors (primary and secondary) from the
circuit board-A. Removing instructions see ”Replace the Circuit Board-A”
• Remove the setscrews (A) and cord guide (1) (B).
• Remove the setscrews (C) and machine socket (D).
• To attach: follow the above procedure in reverse.