21
Adjustment
1.05.16 Lubrication
Requirement
After a running time of 10 seconds a thin fi lm of oil should be visible on paper strip 1
when this is held over the hook.
Check that the machine is fi lled with oil and that the oil lines are free of air. ●
Run the machine for ● 2 – 3 min.
Do not put your hands into the needle area when the machine is running!
Danger of injury from moving parts!
With the machine running, hold paper strip ● 1 against the hook and check the require-
ment.
If necessary, regulate amount of oil with screw ● 2.
1
2
Fig. 1 - 15