8
Attaching the Y belt carriage bracket
Step 1: Locate the upper carriage and the carriage bracket.
Step 2: On the upper carriage you will see a bracket that is
shipped with the carriage. We will remove this bracket and
place the Quilt Artist ™ bracket in it’s place. See fi gure 2-8
Step 3: Remove the shipped bracket from the upper
carriage. See fi gure 2-9
Step 4: Attach the carriage bracket to the upper carriage.
See fi gure 2-10
Step 5: Attach the Black metal Y belt holder to the
carriage bracket. See fi gure 2-11
Note: With the carriage bracket in place, you should have
the idler pulley, carriage bracket, and the pulley on the top
of the motor box all on the same side of the carriage.
Figure 2-8
Figure 2-9
Figure 2-10
Figure 2-11
To Next Page
Loading...
