27
Free-motion darning
Install the feed dog cover. (1)
Set the stitch length dial to "0".
Set the stitch width dial to "0".
Remove the presser foot clamp. (2)
Attach the free-motion/darning foot to the presser foot holder. The
lever (A) should be behind the needle clamp screw (B). Press the
free-motion foot on fi rmly from behind with your index fi nger and
tighten the screw (C). (3)
For darning, fi rst sew around the edge of the hole (to secure the
threads). (4)
First row: Always work from left to right. Turn work by 1/4 and
oversew.
A darning hoop is recommended for easier sewing and better
results.
Note:
Free-motion darning is accomplished without the sewing machine internal
feed system. Movement of the fabric is controlled by the operator. It is
necessary to coordinate sewing speed and movement of fabric.
To Next Page
Loading...
Need help?
General
