31
Twin needle (Optional)
- Turn stitch width dial to "0".
- Turn stitch length dial to the desired stitch length.
- Turn stitch selector to straight stitch, center needle position.
- For twin needle sewing, insert the extra spool pin (included with
the accessories) into the hole on top of the machine.
- Make sure that the two threads used to thread the twin needle
are of the same weight. You can use one or two colors.
- Insert the twin needle in the same way as single needle. Flat side
of needle should face away from you.
- Follow instructions for single needle threading.
Thread each needle separately.
Please Note:
When sewing with twin needle, always proceed slowly, and make sure to
maintain a low speed to insure quality stitching.
When using twin needle on zigzag make sure the stitch width dial is set
between "1" and "3". Do not use twin needle at setting above "3".
To Next Page
Loading...
Need help?
General
