PFT G 54 E - Gearbox Spare Parts List

PFT G 54 E Operating Instructions 09/2006
Knauf PFT GmbH & Co.KG
37
Gearbox spare parts list
Pos. Qty Item no. Description
1 1 00 04 76 21 Tilt flange G 54 with tube bail RAL2004
2 1 00 04 67 94 Gearbox EFQ, 5.5 kW, 400 U, inclination switch, RAL2004
3 1 20 42 41 03 Motor connection cable, 1.9 m with CEE plug
4 1 20 42 88 00 CEE plug, 7 x 16 A, 6 h, red, no. 742
5 1 00 04 11 42 Connector skintop, M 25 x 1.5
6 1 00 06 18 58 Cast hauling bracket G 4 with round escape hopper
7 2 20 20 72 00 Nut, M8, DIN 985, zinc-plated
8 2 20 20 78 05 Hex screw, M 8 x 40, DIN 933, zinc-plated
9 4 20 20 72 00 Nut, M8, DIN 985, zinc-plated
10 2 20 20 78 01 Hex screw, M 8 x 35, DIN 933, zinc-plated
11 1 20 10 29 01 Protection tube for hauling bracket G4
12 2 20 20 78 00 Hex screw, M 8 x 30, DIN 933, zinc-plated
13 1 20 20 85 22 Cotter bolt 8 H11 x 58 x 54, with disk and splint, zinc-plated
14 1 20 10 08 01 Snap lock with catch
15 1 20 20 99 71 Nut for snap lock, M14 x 1.5
16 1 20 20 99 74 Screw for snap lock
17 1 20 54 76 02 Dowel pin, 5 x 36, DIN 1481
18 2 20 20 85 19 Dowel pin, 8 x 40, DIN 1481
19 1 20 10 08 03 Snap lock lever
20 1 20 10 08 04 Return spring
21 1 20 10 08 02 Snap lock locking device