Phanteks EVOLV SHIFT 2 User Manual

11
SHIFT 2
SHIFT 2 air
INSTALLING POWER SUPPLY
CPU CABLE
4.1
SATA/MOLEX CABLE
4.2
GPU CABLE
4.3
24-PIN MOTHERBOARD CABLE
4.4
After plugging in all needed power cables to the PSU, the power cables can be
pre-routed to make the installation process of other components easier.
Route the CPU Cable through the grommet and the rear
cut-out, outside the chassis.
Route the SATA and MOLEX Cables through the front
cut-out, outside the chassis.
Route the GPU Cable(s) through the front cut-out,
outside the chassis.
Route the Motherboard Cable through the left or right
grommet and out the side of the chassis. This depends
on the lenght of the 24-Pin cable.
CPU
SATA/Molex
GPU
24-PIN
450mm
24-PIN
300mm

Phanteks EVOLV SHIFT 2 Specifications

General

Brand	Phanteks
Model	EVOLV SHIFT 2
Category	Computer Hardware
Language	English