To Next PageTo Next Page
Need help?Do you have a question about the Phanteks GLACIER ONE D30 and is the answer not in the manual?
General| Model | GLACIER ONE D30 |
|---|---|
| Radiator Size | 360mm |
| Fan Size | 120mm |
| Radiator Material | Aluminum |
| Radiator Dimensions | 397 x 120 x 27mm |
| Fan Dimensions | 120 x 120 x 30 mm |
| Fan Speed | 500 - 2000 RPM |
| Tube Length | 400mm |
| RGB Lighting | Yes, Addressable RGB |
| Warranty | 5 Years |
| Type | AIO Liquid CPU Cooler |
| Pump Speed | 2800 RPM |
| Socket Compatibility | Intel LGA 1700, 1200, 115x, 2066, 2011-3, 2011 / AMD: AM5, AM4 |
Details for the Glacier One 240 D30 model, including radiator and fan count.
Details for the Glacier One 360 D30 model, including radiator and fan count.
Details for the Glacier One 420 D30 model, including radiator and fan count.
Stand-offs for AMD AM4 and AM5 CPU sockets.
Stand-offs specifically for AMD TR4 CPU sockets (360 models only).
Stand-offs for Intel LGA 2011 and LGA 2066 CPU sockets.
Stand-offs for Intel LGA 1700 CPU sockets.
Stand-offs for Intel LGA 115X and LGA 1200 CPU sockets.
Thumb nuts used for securing the CPU block.
33mm screws for mounting radiators and fans.
35mm screws for mounting radiators and fans.
6mm screws for mounting radiators and fans.
Adapter to connect D-RGB components to a motherboard's 3-pin header.
Adapter to power the pump directly from a PSU via SATA.
Includes thermal compound for CPU installation.
Clips for tidy routing of the cooling tubes.
Clips used for connecting D30 fans together.
Connectors for the D30 fan bridge clips.
Clips for cable management.
Cable for the corner clips.
Covers for screws in corners.
Covers for screws on the bridge.
Instructions for preparing the motherboard for Intel LGA 115X, 1200, and 1700 sockets.
Instructions for preparing the motherboard for Intel LGA 2011 and 2066 sockets.
Instructions for preparing the motherboard for AMD AM4 and AM5 sockets.
Instructions for preparing the motherboard for AMD TR4 sockets.
Securing the CPU block to the motherboard stand-offs using thumb nuts.
Details on connecting the D30 fans, focusing on the input corner.
Mounting the radiator and fans using 30mm and 6mm screws.
Mounting the fan to the radiator and chassis using 35mm screws.
Connecting the pump cable to the motherboard or PSU.
Controlling D-RGB lighting via motherboard or Phanteks controller.
Connecting multiple Phanteks D-RGB products using daisy-chaining.
