Need help?Do you have a question about the Phanteks EVOLV SHIFT XT and is the answer not in the manual?
General| Form Factor | Mini-ITX |
|---|---|
| Expansion Slots | 2 |
| CPU Cooler Height Support | Up to 72 mm |
| PSU Support | SFX, SFX-L |
| Material | Aluminum, Steel |
| Front I/O Ports | 2x USB 3.0, 1x USB Type-C |
| Cooling Support | Up to 240mm Radiator |
| GPU Length Clearance | Up to 324 mm |
| Drive Bays | 2x 2.5" |
Explains how to use the front buttons to control D-RGB modes and colors.
Details the available D-RGB lighting modes like Solid, Breathing, Radar, Sparkle, and Rainbow.
Detailed steps for safely removing the top panel of the Evolv Shift XT chassis.
Instructions for removing mesh panels, the main chassis, and the radiator bracket.
Guidance on installing the motherboard, including CPU cooler pre-installation.
Steps for connecting 8-pin CPU, fan, 24-pin motherboard, and power button connectors.
Guide for connecting front USB-C, USB 3.0, and the PCI-e riser cable.
Steps for installing an SFX or SFX-L power supply unit and connecting the extension cable.
Guide on mounting the SSD to the bracket and connecting SATA power.
Steps to remove PCI-slot covers and install the GPU into the slot.
Optional step to secure the GPU using a velcro tie around PCI-e power connectors.
Guide to install two 120/140 mm fans on the radiator bracket for Air Boost.
Using tie-down points in the bottom compartment to secure excess cables.
Recommended order for routing power cables, starting with the 8-pin CPU cable.
Steps for routing 24-pin motherboard and 6/8-pin GPU cables for optimal management.
To Next Page
