Phanteks EVOLV SHIFT XT User Manual

17
EVOLV SHIFT XTINSTALLING SSD DRIVE
4x
REQUIRES:
Install and connect the Sata
power cable now to the PSU,
SSD and chassis lighting before
proceeding with GPU installation.
Install an SSD
1. Remove the SSD Bracket by sliding it o
the 4x grommets
2. Install your SSD drive on the SSD
bracket with 4x SSD screws
3. Slide the bracket with
installed SSD back on
the 4x grommets

Phanteks EVOLV SHIFT XT Specifications

General

Form Factor	Mini-ITX
Expansion Slots	2
CPU Cooler Height Support	Up to 72 mm
PSU Support	SFX, SFX-L
Material	Aluminum, Steel
Front I/O Ports	2x USB 3.0, 1x USB Type-C
Cooling Support	Up to 240mm Radiator
GPU Length Clearance	Up to 324 mm
Drive Bays	2x 2.5"