Phanteks EVOLV SHIFT 2 User Manual

7
SHIFT 2
SHIFT 2 air
GETTING STARTED
PREPARATIONS
• The Evolv Shift 2 case is designed to support installation in a standing position.
• Don’t turn on the power to your system until installation is complete.
• Discharge your body’s static electric charge by touching a grounded surface before performing any hardware procedure.
• Make sure to consult the manuals of your hardware before installation.
RECOMMENDED INSTALLATION PROCESS
A unique chassis design like the Shift 2 (air) comes with a dierent approach to the installation process.
That is why we recommend to follow these installation tips:
- Follow the component installation order as shown in this manual.
- Pre-route the cables for each installed component as shown at each step.
- Wait with connecting cables until the end of the installation process.
Depending on hardware components such as power cable length the cable routing can be dierent.
1. INSTALL COMPONENT 2. PRE-ROUTE CABLES
TO THE OUTSIDE
3. CONNECT ALL CABLES AT THE END
OF THE INSTALLATION PROCESS

Phanteks EVOLV SHIFT 2 Specifications

General

GPU Length Support	Up to 335 mm
PSU Support	SFX, SFX-L
PCI Slots	2
Form Factor	Mini ITX
Material	Steel, Aluminum
Maximum CPU Cooler Height	85 mm
Radiator Support	Up to 120mm
Color Options	Black