Phanteks Magnium Gear NEO Qube 2 User Manual

MAGNIUMGEAR
148 mm
410 mm
128x400x50 mm
140x430x75 mm
130x410 mm
275 mm
Up to 280 mm wide
CPU cooler height
GPU length
Side Radiator
Top Radiator
Bottom Radiator
Power supply length
E-ATX Motherboard
01
INTRODUCTION
Thank you for choosing the Magnium Gear NEO
Qube 2. This manual will walk you through the
installation process and provides an overview of all
the features, clearances and accessories that the
NEO Qube 2 provides.
This manual is intended for:
- NEO | Qube 2
- NEO | Qube 2 IM
If you have any questions, suggestions or require customer
service, please check our website www.magnium-gear.com or
contact us through support@magnium-gear.com
Power
Reset*
* Becomes power button for dual-system, see
DUAL-SYSTEM section for more information.
D-RGB color
D-RGB mode
Headphones & Mic
USB C
USB 3.0
USER MANUAL
MODES
Press and hold the MODE button for two seconds
to turn o LEDs, press again to turn it ON
COLORS
SOLID
BREATHING
SPARKLE
MUTLI-COLOR
TURN OFF LEDs
INCLUDED ACCESSORIES
FRONT I/O
D-RGB CONTROLS
FAN & RADIATOR SUPPORT
SIDE TOP BOTTOM
CLEARANCE
FANS
RADIATOR
120mm 3x 3x 3x
- 2x 2x
up to 360 mm
-
up to 360 mm
up to 280 mm
up to 360 mm
-
120mm
140mm
140mm
WWW.MAGNIUM-GEAR.COM
VERSION 1.3
33x
SSD & Motherboard
Screw
8x
HDD Screw
6x
Zip Ties
5x
Motherboard Stand-o
4x
PSU Screw
NOTE | D-RGB control buttons are deactivated if connected to a motherboard.

Phanteks Magnium Gear NEO Qube 2 Specifications

General

Color	Black, White
Material	Steel, Tempered Glass
Expansion Slots	7
Maximum GPU Length	400mm
Cooling Support	Air and Liquid Cooling
Model	NEO Qube 2
Case Type	Mid-Tower
Motherboard Support	ATX, Micro-ATX, Mini-ITX
Drive Bays	2x 3.5"
Front I/O	2x USB 3.0, 1x USB 3.1 Type-C, Audio In/Out
Fan Support	Rear: 1x 120mm
Radiator Support	Rear: 120mm

Summary

Introduction and Overview

Included Accessories and Specifications

Included Accessories

Lists the hardware accessories provided with the computer case, including screws and ties.

Fan and Radiator Support

Details the supported fan sizes and radiator mounting options for different case sections.

Clearances

Specifies the maximum dimensions for CPU cooler, GPU, and PSU within the case.

Front I/O Ports

Diagram and labels for the front panel connectivity including USB, audio, and controls.

D-RGB Controls

Explains the modes and color options for the case's integrated D-RGB lighting system.

Chassis Panel Removal

Removing Top Panels

Instructions on how to loosen thumb screws and slide off the top panels.

Removing Side and Front Panels

Guide on lifting and pulling away the side and front panels from the chassis.

Component Installation

Motherboard Installation

Details on installing the motherboard, including screw types and supported form factors.

Power Supply Installation

Steps for removing the storage bracket and securing the power supply unit with screws.

Storage Installation

Guide to configuring storage brackets for SSDs and HDDs in various layouts.

Connectivity and Optional Features

I/O Cables Connection

Diagram for connecting front panel I/O cables like power, reset, USB, and audio to the motherboard.

D-RGB Cable Expansion

Instructions for expanding D-RGB lighting with additional products via available connectors.

Motherboard Lighting Control

Information on controlling case lighting through a compatible motherboard's D-RGB header.

Dual-System Setup

Optional steps for setting up a dual-system, including specific hardware requirements and connections.