34
3.6 Shutter release modes
Single-Frame Mode
The lm is advanced one frame each time the shutter is released.
Set the shutter release mode selector to “S”
Continuous Mode
Photos are taken as long as the shutter release button is pressed.
Set the shutter release mode selector lever to “C”. Photos are taken
continuously at a rate depending on the buffer speed of the back
mounted on the camera.
Mirror up mode
When the shutter button is half-pressed, the mirror moves up, and when
the shutter button is pressed again, the shutter is tripped, and a picture
is taken. For the mirror up shooting procedure.
Self-Timer Mode
In this mode, the shutter will be released 10 seconds after the shutter
release button is pressed.
Turn the shutter release mode selector lever to the position.
When the shutter release is pressed, the self timer lamp will blink for 7
seconds. Then, it will blink more rapidly for 3 seconds and the camera
releases the shutter. For instructions about the self timer function.
To Next Page
Loading...
