PhaseOne PAS 280 - Technical Data; System Weight; Power Consumption

PAS 280 Operation Guide
7. Technical Data
Page 39 of
46
7 Technical Data
7.1 System Weight
The weight of system components is listed in the following table:
Description
Connects to
1 x iXM-RS 280F camera with two RS-90mm lenses
1 x iXM-RS 150F achromatic camera with RS-50mm lens and NIR filter
1 x system frame
1 x iX Controller MK4
GNSS controller adapter plate
19 kg / 41.9 lb
Applanix POS AV 310 with IMU-82
3.4 kg / 7.5 lb
Applanix POS AV 510 with IMU-91
3.4 kg / 7.5 lb
Applanix POS AV 610 with IMU-57
5 kg / 11 lb
SOMAG DSM 400 Stabilizer
14 kg / 30.9 lb
SOMAG GSM 4000 Stabilizer
29 kg / 63.9 lb
7.2 Power Consumption
Power consumption for the system is listed in the following table:
Parameter
Value
Power consumption
Up to 8 A
Power source
28 VDC
Note
• Installation on an aircraft with a 12 VDC power system is not approved unless special measures are
taken to provide the PAS 280 system with 28 VDC supply.
• A 10A circuit breaker must be installed on the 28 VDC power supply on the aircraft side.