PhaseOne PAS 280 - Installing Operator Monitor; Electrical Structure;Cabling; Electrical Diagrams of All Variants

PAS 280 Operation Guide
4. System Installation and Disassembly
Page 23 of
46
4.3.5 Installing Operator Monitor
1. Mount the operator monitor. A suggested method
of mounting is shown on the right.
4.4 Electrical Structure/Cabling
4.4.1 Electrical Diagrams of All Variants
Figure 14 shows power and communication connections diagram for a PAS 280 system with a DSM 400
stabilizer without an iXM-RS 150F achromatic camera.
Figure 15 shows power and communication connections diagram for a PAS 280 system with a DSM 400
stabilizer and iXM-RS 150F achromatic camera.
Figure 16 shows power and communication connections diagram for a PAS 280 system with a GSM 4000
stabilizer without an iXM-RS 150F achromatic camera.
Figure 17 shows power and communication connections diagram for a PAS 280 system with a GSM 4000
stabilizer and iXM-RS 150F achromatic camera.
Figure 18 shows power and communication connections for the pilot and operator monitors and the
keyboard.