PhaseOne PAS 280 - Unboxing the System; Product Identification

PAS 280 Operation Guide
3. Unboxing the System
Page 18 of
46
3 Unboxing the System
Verify that all parts were supplied according to the specific packing list for your system.
3.1 Product Identification
To enable support for your system, you must identify and record the model and serial numbers for each of
the following components:
• Cameras: the model number and serial number is located on two labels in the middle section joining both
cameras.
• Stabilizer: model number and serial number is located on a label on the stabilizer.
• Applanix POS AV: model number and serial number is located on a label on the unit.