PhaseOne XF - Page 14

XF Camera System | OneTouch User interface
14
The XF Camera body’s top user interface consists of:
Release button at the front right-hand side,
3 Customizable dials (default is Shutter Speed, Aperture and ISO)
1. Front dial
2. Rear dial
3. Side dial
A touch sensitive screen with 2 control keys
A. Front key
B. Rear key
Operational user controls on front and rear:
C. Rear Button
D. Front Button
The basic logic of operation (with default settings):
1. Set the camera up with required settings using touch
screen or using Front and Rear key (A, B)
2. Operate ISO, Shutter Speed and Aperture with the dials
(1, 2, 3)
3. Half press the release button to focus (AF mode on lens)
4. Apply exposure lock or focus lock with front and rear user
controls.
5. Fully press the release button to shoot...
NOTE:
A secondary shutter release control is available on the front lower-right
side of the camera if you want to shoot handheld in portrait orientation
or using waist level finder
1
A
2
B
3
C
D