Navigation | XF Camera System
13
Rear Dial
This dial is principally used to adjust ISO, and like the mode
dependent Side Dial, is also used for making selections from
both the Camera Function settings and Camera Menu. The
Rear Dial is customizable by pressing the rear key on the XF
top and navigate to Camera Utilities>Control Setup.
Front Button
The Front Button is a mode dependent control set to activate
the depth of field function, per default. The Front User control
is customizable by pressing the rear key on the XF top and
navigate to Camera Utilities>Control Setup.
Rear Button
The Rear Button is programmed, per default, to activate the
Mirror Up (MUP). The Rear User control is customizable by
pressing the rear key on the XF top and navigate to Camera
Utilities>Control Setup.
Front Key
A short press on this key activates the camera function icons
displayed on the top touch screen. By default the function
icons cannot be accessed directly until they’re enabled.
Rear Key
The Rear Key is used to gain access to the camera menu. A
short press and release of the Rear key is required to access
the menu. The Rear key’s function is repurposed for navigation
when in this mode.
Camera On/O Button
Press the button to power up the camera. If left untouched, the
camera will enter Sleep mode after some seconds. Press and
hold the button for 2 seconds to power the camera down. The
IQ back will power down after 3 seconds.
On/O Button
To Next Page
Loading...
Need help?
General
