XF Camera System | Camera Defaults
22
Camera pre-set from factory or after “Reset to Default”:
Shutter Speed: Front dial
Shutter Speed can be adjusted using the Front dial (CW and CCW)
Aperture: Side dial
Aperture can be adjusted using the Side dial (CW and CCW)
ISO Selection: Rear dial
ISO can be adjusted using the Rear dial. (CW or CCW)
AF Drive mode:
Single (default), Continuous.
AF drive mode can be changed by pushing the Rear Key to
enter the menu and selecting Camera operation.
Manual focus is selected using the physical Auto/Manual collar
on the lens.
Capture Mode:
Single capture (default), Continuous capture, Vibration Reduction,
and Bracketing.
Capture mode can be changed by selecting the Capture Mode on
screen and selecting the required capture mode on the screen.
White Balance
Auto (default), Daylight, Fluorescent, Tungsten and Flash.
White Balance can be selected in the IQ back WB menu.
Exposure Mode:
Manual (default), Aperture Priority, Time Priority and Program.
Exposure mode can be changed by selecting the Exposure
Mode on screen and adjusting the Side dial.
NOTE:
The XF Camera can be reset to factory defautl settings from the camera menu.
Press the Rear Key and using the front dial or Rear Key again, scroll down to Re-
store to Default. Select the option using the rear dial, and conrm selection with
rear key.
To Next Page
Loading...
Need help?
General
