PhaseOne XF Quick Guide

Readying the Camera | XF Camera System
9
Powering ON and OFF the system on the XF body
Powering on the XF and the IQ simultaneously is achieved with
a short press of the power button on XF.
A long press of the same button will power o the XF, the IQ
will follow and power-o automatically after a few seconds.
Loading the battery in the XF Body
1. Open the battery compartment cover located in the base
of the XF camera grip.
2. Insert the battery with the power contacts facing up to-
wards the camera handle.
3. Push the battery up until it locks into position
4. Close the battery compartment cover.
Removing the battery from the XF body
1. Open the battery compartment cover
2. Push the metal retaining catch inside the grip to release
the battery and pull out.
Loading the battery in the IQ
1. Open the battery cover on the underside of the IQ3.
2. Insert the battery, power contacts first, into the compart-
ment all the way until the retaining catch locks into place.
3. Close the compartment cover.
Removing a battery from the IQ
1. Open battery compartment
2. Push the retaining catch inside the compartment to re-
lease the battery and pull out.
3. Close battery compartment cover.

PhaseOne XF Specifications

General

Image Stabilization	No
Lens Mount	Phase One XF
ISO Sensitivity	50 - 12800
Shutter Speed	1/4000 to 60 minutes
Storage Media	CF card, SD card
Display	3.2 inch touch screen
Battery	Rechargeable lithium-ion battery
Sensor Resolution	50MP, 80MP, 100MP, 150MP (depending on digital back)
LCD Screen Resolution	1.15 million dots
Connectivity	USB 3.0, HDMI
Weight (body only)	1490 g (without digital back, viewfinder, or battery)