IQ backs For Hasselblad H | XF Camera System
37
Viewfinder Mask
Please check the relevant Hasselblad H-series manual regard-
inghow to dismount the viewfinder and remove the focus
screen. Change of viewfinder mask is only needed for the
50MP or 40MP IQ backs
1. Remove the protection tape from the mask.
2. Dismount the Viewfinder and remove the focus screen.
3. Place the viewfinder mask in the bracket that holds the
focusing screen.
4. Re-mount the focus screen, followed by the viewfinder.
Hasselblad H Camera Display
The Hasselblad display can display some IQ back information.
For example, error messages including ”Digital back storage
media is full” and also ISO Setting in the IQ back
ISO settings should be set from the IQ back or in Capture One
Pro software when shooting tethered.
All the Hasselblad H auto exposure modes are fully supported
by the IQ back. Please check the relevant Hasselblad H-series
manual for more information on exposure modes
To Next Page
Loading...
