EasyManua.ls Logo

Phcbi MPR-1014R Series - User Manual

Phcbi MPR-1014R Series
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MPR-1014R
MPR-1014Series
Please read the operating instructions carefully before using this product, and keep the operating
instructions for future use.
See page 44 for all model numbers.
Operating Instructions
Pharmaceutical Refrigerator
MPR-1014R

Table of Contents

Questions and Answers

  • D
    Daniel CoxAug 10, 2025
    What to do if Phcbi MPR-1014R nothing operates even when plugged in?
    • M
      Michael SmithAug 10, 2025
      If your Phcbi Refrigerator isn't working even when plugged in, check these potential causes: * Ensure the unit is correctly plugged into the power supply. * Verify that the power supply's capacity and voltage meet the refrigerator's requirements. * Check for any power outages in your area. * Reset the circuit breaker if it has been activated. * Replace the fuse on the supply circuit if it's blown.
  • B
    Brooke MasonAug 15, 2025
    Why is the alarm device activated during operation of my Phcbi MPR-1014R Refrigerator?
    • F
      Faith FrederickAug 15, 2025
      The alarm on your Phcbi Refrigerator might activate during operation due to several reasons: * Check if the unit is properly connected to the power supply. * Ensure the power supply meets the required capacity and voltage. * Look for any power outages. * Reset the circuit breaker if it has tripped. * Replace the fuse if it has blown. * Verify the chamber temperature setting. * Minimize the time the door is open. * Avoid placing warm items in the chamber. * Make sure the door is completely closed.
  • T
    Thomas BatesAug 25, 2025
    How to fix a noisy Phcbi MPR-1014R Refrigerator?
    • T
      Travis WashingtonAug 26, 2025
      To address a noisy Phcbi Refrigerator, try the following: * Ensure the floor is sturdy and level. * Adjust the refrigerator to be level. * Make sure there is space between the cabinet and the surrounding wall. * Check the installation of the evaporating tray or unit cover.
  • C
    Cathy ScottAug 30, 2025
    What to do if no key operation is available on Phcbi Refrigerator?
    • D
      Donald SparksAug 30, 2025
      If you can't use the keys on your Phcbi Refrigerator, it might be because the key lock is activated. To fix this, set the key lock to OFF (L 0).
  • J
    Joseph ColemanSep 4, 2025
    Why does my Phcbi MPR-1014R return to temp display mode during setting?
    • A
      Antonio MasonSep 4, 2025
      The setting mode on your Phcbi Refrigerator automatically returns to the temperature display mode if no key is operated for 90 seconds due to the auto-return function.
  • A
    Alyssa DeanNov 19, 2025
    Why Phcbi MPR-1014R Refrigerator chamber does not get cold enough?
    • M
      Matthew LittleNov 19, 2025
      If the chamber of your Phcbi Refrigerator isn't getting cold enough, consider the following: * Reduce the amount of items or warm products placed inside. * Minimize how often you open the door. * Lower the set chamber temperature. * Move the unit away from direct sunlight or heat sources. * Ensure proper ventilation around the unit. * Confirm the ambient temperature is within the allowable range. * Reduce the number of stored items. * Clear any blockages from the air exhaust vent. * Cover the access port with insulation and rubber caps when not in use. * Remove any foreign substances from between the door gaskets. * Reinstall the unit according to the specifications in the manual. * If the door seal is damaged, contact our sales representative or agent for replacem...

Phcbi MPR-1014R Series Specifications

General IconGeneral
ModelMPR-1014R Series
Defrost SystemAutomatic
Voltage220-240V
Frequency50/60 Hz
TypeRefrigerator
Alarm SystemYes
CertificationCE

Related product manuals