Phenix Technologies 6CP50/10-3 User Manual

6CP50/10-3
4-2
ELECTRICAL SETUP
CONNECTIONS AND GROUNDING: (Quick Reference)
 Position set in the desired location.
 Ground set by use of ground terminal on base of high voltage transformer.
 Connect TX1 and TX2 cables between controls and high voltage transformer.
 Connect SX1 - external interlock circuit as appropriate.
 Connect return lead, provided, to low potential side of test specimen. See Ground-Guard-Return
connection instructions on following pages.
 Connect high potential side of test specimen to either the 10kV (side) or 50kV (top) high voltage output.
 Connect main power cord to appropriate receptacle.
(Further instructions on test connections may be found in ANSI C37.60)

Phenix Technologies 6CP50/10-3 Specifications

General

Brand	Phenix Technologies
Model	6CP50/10-3
Category	Test Equipment
Language	English