BK-130
1-1
SECTION 1: TECHNICAL SPECIFICATIONS
Input
110 - 120 volts, single phase 50 / 60 Hz, 30 amperes
OR
208 - 240 volts, single phase 50 / 60 Hz, 15 Amperes
(Refer to Serial Tag for voltage and current designation)
Output Rating
0-36 kilovolts, 180 milliamperes
0-130 kilovolts, 50 milliamperes
Duty Cycle – Capacitive Loading
5 minutes ON/15 minutes OFF @ 50 mA / 180 mA
1 hour ON/1 hour OFF @ 33.3 mA / 120 mA
Continuous @ 25 mA / 90 mA
Type of Cooling
ONAN (Oil / Air Natural Convection)
Operating Ambient Temperature
10 – 40 degrees C
Output Termination
2” Polished Ball – 36 kV
3” x 12” High Voltage Spinning – 130 kV
Metering - Digital
Output Voltmeter: 3 ½ Digit LCD, Accuracy ±(0.8% of reading + .2% of range)
Output Currentmeter: 3 ½ Digit LCD, Accuracy ±(0.8% of reading + .2% of range).
4 Ranges: 0-200µA, 2mA, 20mA, 200mA
Sizes and Weights
Control/Regulator Section: 21.25” (540mm) W x 16.75" (426mm) D x 13.75" (350mm) H;
120V - 45 lbs. (20.4 kg), 220 V – 50 lbs (22.7 Kg)
High Voltage Section: 16" (406mm) W x 16" (406mm) D; X 30” (762mm) H;
178 lbs. (80.7 kg)
Additional Equipment
Cart : 22.5” (572mm) W x 29.25” (743mm) D x 50” (1270mm) H;
61 lbs. (27.7 kg)
Cables: 20 lbs. (9.1 kg)
Total Unit Weight: 120V - 304 lbs. (137.9 kg), 220V – 309 lbs. (140.2 Kg)
To Next Page
Loading...
