Parental control
This function will prevent unauthorised use of your TV-VIDEO
Combi. All button-functions will be locked.
DYou can make programmed recordings while the parental
control is on.
a Press the MENU button. The main menu will appear.
b Select the line ’Setup’ with the BP r or AP q
button and confirm with the SqC button.
SETUP
Parental control OFF
Display MAX
ã Exit:
« press MENU
c In the line ’Parental control’ select ’ON’ with
the DSr or SqC button.
d Confirm with the OK button.
e To end, press the MENU button.
Keep the remote control in a safe place.
f Switch off the machine with the STANDBY m button.
DIf you want to switch off parental control, select
’OFF’ in line ’Parental control’.
DIf a button is pressed with activated parental
control, ’Parental Control active’ will
appear.
DIf you have activated parental control, you can only
operate the TV-VIDEO Combi with the remote
control.
DIf you want to eject a cassette with activated
parental control, press the STOP h button several
seconds.
Switching the On-screen display (OSD) on
or off
You can switch the On Screen Display of the current operating
information on or off.
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the menu buttons
BP r or AP q and confirm with the SqC button.
SETUP
Parental control OFF
Display MAX
ã Exit:
« press MENU
c Select the line ’Display’ with the menu buttons
BP r or AP q .
d Select one of the options indicated with the menu buttons
SqC or DSr .
’MAX’: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: The OSD is reduced to a minimum.
’PROGR.’: The programme number is always shown.
’COUNTER’: The tape position is always shown.
e Confirm with the OK button.
f To end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
8. ADDITIONAL FUNCTIONS
20
To Next Page
Loading...
