Continuous playback
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
a Press the MENU button. The main menu appears.
b Select the line ’Tape’ with the menu buttons BP r or
AP q . Confirm with the menu buton SqC .
TAPE
Tape speed SP
Repeat play OFF
Jitter (,,,,=,,,,$
Tracking (,,,,=,,,,$
Cleaning
ã Exit:
« press MENU
c Select the line ’Repeat play’ with the menu buttons
BP r or AP q .
d Select ’ON’ with the menu buttons DSr or
SqC . If you select ’OFF’, the function will be
switched off.
e Confirm with the OK button.
f Press the MENU button.
Switch off function (SLEEP TIMER)
You can programme your set to switch off after a
predetermined period.
a Press the TIMER s button on the remote control.
b Select line ’Sleep timer’ with the BP r or
AP q button and confirm with the SqC button.
c Determine the time left until switch off in 15 minutes
intervals using the BP r or AP q button.
DYou can switch the function off with the CLEAR
button on the remote control.
d Confirm with the OK button.
e To end, press the TIMER s button.
Switch on function (WAKE-UP TIMER)
You can programme your set to switch on at a predetermined
time.
a Press the TIMER s button on the remote control.
b Select line ’Wake-up timer’ with the BP r or
AP q button and confirm with the SqC button.
c Select the entry field with the DSr or SqC
button.
d Enter the information with the BP r or AP q button
or with the number buttons 0-9 .
e In the line ’ON’, switch the function on or off.
f Press the OK button.
g To end, press the TIMER s button.
21
To Next Page
Loading...
