Philips 22PFL3606 - Page 17

17
English
• [Digital Crystal Clear]: Fine-tune each
pixel to match surrounding pixels. This
setting produces a brilliant, high-denition
image.
• [Advance sharpness]: Enables
superior picture sharpness.
• [Dynamic contrast]: Enhance contrast.
[Medium] setting is recommended.
• [Dynamic backlight]: Change
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]: Smooth
out transitions on digital pictures.
• [Color enhancement]: Make colors
more vivid and improves the details
in bright colors. You can switch this
feature on or off.
• [Gamma]: For selected models.
Change the midtone intensity in
the picture. Black and white are not
affected.
• [PC mode]: If available, when a PC is
connected to the TV, adjust the picture.
• [Picture format]: Change the picture
format.
• [Screen edges]: Change the viewing area.
(when set to maximum, you may see noise
or rough edge of an image).
• [Picture shift]: If available, change the
picture position for all picture formats
except for [4:3], [Unscaled] and [Wide
screen].
Use smart picture
Use smart picture to apply pre-dened picture
settings.
1 Press ADJUST.
2 Select [Smart picture], then press OK.
3 Select one of the following settings, then
press OK.
• [Personal]: Apply your customized
picture settings.
• [Vivid]: Rich and dynamic settings,
ideal for daytime viewing.
• [Football]: Ideal settings for football
matches.
• [Cinema]: Ideal settings for movies.
• [Energy saving]: Settings that conserve
the most energy.
Manually adjust picture settings
1 Press .
2 Select [Setup] > [TV settings] > [Picture],
then press OK.
3 Select one of the following settings, then
press OK.
• [Smart picture]: Access predened smart
picture settings.
• [Reset]: Reset to factory default settings.
• [Contrast]: Adjust the intensity of backlight
areas, while the video contents are kept
unchanged.
• [Brightness]: Adjust the intensity and
details of dark areas.
• [Color]: Adjust color saturation.
• [Tint]: Compensate for color variations.
• [Sharpness]: Adjust sharpness in the image.
• [Noise reduction]: Filter and reduce noise
in an image.
• [Color temp.]: Adjust the color balance in
an image.
• [Custom color temp]: Customize color
temperature setting. (Only available if
[Color temperature] > [Custom] is
selected)
EN