Philips 244ESB/00 - Page 12

12 244E2 LCD
Mechanical Instruction
8 Pull out two piece of wires
9 Disassembled the
Main-BKT : hexagonal
screw *4
Screw-driver
10 Unlock the LVDS by using
two hands (see note).
Please carefully use
two hands (one hand
presses the
locking-latch of LVDS
cable’s housing, and
at the same time
another hand pulls out
the LVDS cable.) for
this step to avoid from
deforming the
terminals of
positive-locking type
LVDS cable.
11 Tear off the iron sheet which
cover the AC-SOCKET
Disassemble the Power
board
Æ 4 screws
Plus driver
The locking-latch
of LVDS cable’s
The locking-latch
of FFC cable’s