244E2 24” Wide FHD LCD Monitor
2010/05/16 PHILIPS 25 of 36
244E2 LCD 75
General Product Specification
5 Mechanical characteristics
5.1 Cosmetic -
Philips IDʳʳ
5.2 Mechanical data files -
ˣ˘ʳ˹˼˿˸ʳ˸˼˸˷ʳ
5.3 Location of Philips logo -
ˣ˸ʳˣ˻˼˿˼ʳ˴˾˸ˀʳ˻˸˸ʳ
5.4 Gap between panel and front bezel
ˏʳ˄ˁ˅ʻˁʼʳʳ
5.5 Location of Control icons -
ˣ˸ʳˣ˻˼˿˼ʳ˚˴˻˼˶ʳ˻˸˸ʳ
5.6 Color for resin/paint -
ˣ˸ʳˣ˻˼˿˼ʳ˴˾˸ˀʳ˻˸˸ʳ
5.7 Fire enclosure request-
˦˻˼˸˿˷˼˺ʳ˖˸ʳ˻˿˷ʳ˹˿˹˼˿˿ʳ˼˸˴˼˴˿ʳ˴˷˴˷
5.8 Resins
x RoHS required
x WEEE required.
x Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.9 If paint is used
x RoHS required
x WEEE require
x If new painting type need to implement, refer to UN-D 1235.
5.10 Plastic mold tooling
x Tooling to be designed to minimize cosmetic defects induced by molding process (sink,
blush, weld lines, gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
x Painting to cover up cosmetic defects due to molding is strongly discouraged.
x China RoHS mark requested.
To Next Page
Loading...
