Philips 247E3L - Page 20

18
4. PowerSensor
• Youcanreturntothedefaultmodeatanytime(Setting3).
Hot key Sensor distance
Power Sensor
3
How to adjust settings
IfPowerSensorisnotoperatingcorrectlyinsideoroutsidethedefaultrange,here’showtofine-tune
detection:
• PressthePowerSensorhotkey.
• Youwillfindthedefaultposition‘3’ontheadjustmentbar.
• AdjustthePowerSensordetectionadjustmenttoSetting4andpressOK.
• TestthenewsetuptoseeifPowerSensorproperlydetectsyouinyourcurrentposition.
 Note
AmanuallyselectedPowerSensormodewillremainoperationalunlessanduntilitisreadjustedorthe
defaultmodeisrecalled.IfyoufindthatthePowerSensorisexcessivelysensitivetonearbymotionfor
somereason,pleaseadjusttoalowersignalstrength.