PrimeSuite xxHFL4373D/10 Page 17
4. Select [TV/Radio] > [Radio], then
press OK.
Use Hotel Information
Activate Hotel Information
You can use Hotel Information to display a
picture as Information sheet on your TV. Make
sure that the location of your TV is set to
[Home] mode.
1. Press .
2. Select [Hotel Information] , then press OK.
The default or pre-loaded picture is displayed
Visually impaired
Some digital TV channels broadcast special
audio adapted for people who are visually
impaired. The normal audio is mixed with extra
commentary.
To switch on visually impaired audio (if
available)
1. While watching TV, press .
2. Select [Universal access], and press
the green button to enter [Visually
impaired].
3. Use the following buttons to select:
• Red - [Off] : Turn off visually impaired
audio.
• Green - [Speakers] : Hear visually
impaired audio from speakers only.
• Yellow - [Headphones] : Hear visually
impaired audio from headphones only.
• Blue - [Speakers + headphones] : Hear
visually impaired audio from speakers
and headphones only.
4. Press to exit.
•To verify whether visually impaired audio is available,
press and select [Audio language]. Languages with an
eye icon indicate visually impaired support.
Adjust volume for the visually impaired
1. In the [Universal access] menu, press
the yellow button to select [Mixed
volume].
2. Press the Navigation buttons to move
the slider up or down, then press OK.
3. Press to exit.
Audio feedback for the visually impaired
This feature enables audio feedback when
buttons are pressed on the remote control or
TV.
1. In the [Universal access] menu, press
the blue button to select [Key beep].
2. Press the green button to turn on audio
feedback or press the red button to turn
it off.
3. Press to exit.
To Next Page