Philips 32HFL4373D/10 - Change Picture and Sound Settings; Menu

PrimeSuite xxHFL4373D/10 Page 26
TV Setup
With this option, all basic TV functionality can be
configured. If any setting is changed within the PBS
Menu, they should be stored before pressing [OK],
otherwise they will be discarded.
Select Setup to make changes to the TV settings
Change picture and sound
settings (with PBS setup RC)
Picture settings
1 Press [Home/Menu] > [TV Setup>.
2 Select [Setup] > [TV settings] > [Picture]
, then press OK.
3. Select a setting to adjust and press
<OK>:
• [Smart picture]: Accesses pre-defined
smart picture settings.
• [Personal]: Sets the TV to your
personal preferences.
• [Vivid]: Rich and dynamic settings,
ideal for daylight use.
• [Natural]: A natural picture setting.
• [Cinema]: Ideal settings for watching
movies.
• [Game]: Ideal settings for gaming.
• [Energy saving] : The most energy-
conscious settings.
• [Standard]: Adjusts picture settings to
suit most environments and types of
video. Is Factory default setting.
• [Photo]: Ideal settings for viewing
photos.
• [Custom]: Allows you to customise and
store personal picture settings.
Press OK to confirm your choice.
• [Reset]: Resets to factory default
settings.
Press OK to confirm your choice.
• [Contrast]: Adjusts the intensity of
bright areas, keeping dark areas
unchanged.
Press OK to confirm your choice.
• [Brightness]: Adjusts the intensity and
details of dark areas.
Press OK to confirm your choice.
• [Colour]: Adjusts colour saturation.
Press OK to confirm your choice.
• [Hue]: Compensates colour variations
in NTSC encoded transmissions.
Press OK to confirm your choice.
• [Sharpness]: Adjusts sharpness in the
image.
Press OK to confirm your choice.
• [Noise reduction]: Filters and reduces
noise in an image.
Press OK to confirm your choice.
• [Tint]: Adjusts the colour balance in an
image.
Press OK to confirm your choice.
• [Custom tint]: Customises tint setting.
Press OK to confirm your choice.
• [Pixel Plus HD]: Accesses advanced
settings, including [HD Natural
Motion], [100 Hz Clear LCD],
[Advanced sharpness], [Dynamic
contrast], [Dynamic backlight], [MPEG
artifact reduction], [Colour
enhancement], [Gamma].
Press OK to confirm your choice.
• [PC mode]: Enables picture settings
adjustment when a PC is connected to
the TV via HDMI. If enabled, you can
select [Picture format] to be unscaled
which provides maximum detail for
display of PC content.
Press OK to confirm your choice.
• [Picture format]: Changes the picture
format.
Press OK to confirm your choice.