Philips 32HFL4373D/10 - Page 31

PrimeSuite xxHFL4373D/10 Page 31
[Symbol rate mode]: Automatic
TV will use the preset Symbol
rate (6.900/6.875)
Manual
Option to set Symbol rate 1
and Symbol rate 2
[Symbol rate 1]: 0.000 (to set)
[Symbol rate 2]: 0.000 (to set)
[Search]: Start the test scan
Set the frequency for the selected MUX
[000.00] and press [Search].
After finding the channels press [Done].
• [Analogue: Manual installation]:
Will install a analogue channels that is
available in the whole frequency spectrum.
Set the necessary values:
[System]: West Europe
East Europe
UK
France
[Find channel]: 000.00 (to set)
[Search] > [Done]
[Fine tune]: 000.00 (to set)
Press ▲▼ or ▼ to
fine tune the channel.
[Done]
[Store current channel]: Store the fine
tuned channel under
the current channel
store under a new
channel number.
[Store as new channel]: Store under a
new channel number.
4 Press [Back/PP] to return to TV Setup
Menu.
5 Press [Back/PP] to exit.
Child lock
Child lock is a mechanism to prevent viewing a
channel that has a higher Parental rating then
set with this feature.
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Child lock], then press
OK.
3. Select a setting to adjust and press
<OK>:
• [Parental rating]: Set the proper value
(only once a code has been set)
• [Channel lock]: Mark the channels that
are influenced by the Parental rating
• [set code]: Enter a 4 digit code and
press <OK>
4 Press [Back/PP] to return to TV Setup
Menu.
5 Press [Back/PP] to exit.
Decoder
Decoder is …….
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Decoder], then press
OK.
3. Select a setting to adjust and press
<OK>:
• [Channel]: Set the channel location of
the decoder.
• [Status]: Select
…………………………………….
4 Press [Back/PP] to return to TV Setup
Menu.
5 Press [Back/PP] to exit.