Philips 32PFL3514D - Connect the AC Power Cord

Connect a set-top box through component video input or HDMI
32PFL3504D / 32PFL3514D
!
I
42PFL3704D
Connect the AC Power Cord
(Available for 42PFL3704D only)
Warning
• Verify that your power voltage corresponds with the voltage printed at the back of the
T_4 Do not insert tile AC power cord if the voltage is different
t Locate the power connector at the back oftheTV.
The location of the power connector varies according toTV model.
2 Insert the AC power cord fully into the power connector,
3 Connect the AC power cord plug to the power outlet. Ensure that
the cord is tightly secured at both ends,
42PFL3704D
Disconnect the TV from the power outlet
H Caution
• Pull the AC power cord by the plug; do not pull on the AC power cord.
t Unplug the AC power cord from the power outlet.
2 Unplug the AC power cord from the power connector at the back
oftheTV,
10 EN