ConnectYour Devices
This section describes how to connect a selection of devices with
different connectors. Different types of connectors can be used to
connect a device to yourTqZ.The following sections describe examples
only, other configurations are possible.
When you connect composite or component cables, match the cable
colors to the connectors on theT_.
Connect a DVD player/recorder via composite
connectors
32PFL3504D / 32PFL3514D
AUDIO L/R +VIDEO
RECORDER
CA_ / 0 X
RF IN _r" Set-top box
available for 42PFL3704D only
AUDIO L/R +VIDEO
_}YII¸i¸¸>4.........................._ " _ii¸
OUT___
AUDIO L/R +VIDEO
RF IN nr
CABLE
Ifyour recorder has an S-VHS video jack for improved picture quality,
connect an S-Video cable with the S-Video input. Connect the audio
cables to the audio L and R input jacks.
• When you use an S Video connectol; do not connect any device to the Composite
video iack.
Only the ]eft loudspeaker- reproduces sound for- mono equipment, Use a rnono to
stereo adapter- (not supplied) for- sound reproduction via all internal loudspeakers.
42PFL3704D
.....]:;IN
£_ AUD O L/R + VIDEO
OUT _=:/L_ IN
OUT
LE
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
30 EN
To Next Page
Loading...
