Connect a set-top box via a composite connector
32PFL3504D / 32PFL3514D
ii¸ _
ii ii i
]i ii
Connect a DVD player/recorder via component video
output connectors (YPbPr) and analog audio
32PFL3504D / 32PFL3514D
SelectedTV models can display 1080i, 720p and 480p DTV signals
when connected to a DTV set-top box. Set the output of the cable box
to either 1080i, 720p or 480p.A DTV signal must be available in your
area.
Set-top box
42PFL3704D
OUT
DVD / Set top box OUT
i i iN
YPbPr .......
42PFL37(_D
Selected TV models can display 1080i, 1080p, 720p and 480p DTV
signals when connected to a DTV set-top box. Set the output of the
cable box to either 1080i, 1080p, 720p or 480p. A DTV signal must
be available in your area.
.....}:,:_'>'_;.........................i¸''¸'iii!
If your device has an S-VHS video jack, improve the picture quality as
follows:
• Connect an S-Video cable to the S-Video input of VIDEO.
• Connect the audio cables to the audio L and R input jacks of
VIDEO.
" When you use an S Video connector; do not connect any device to the Composite
video jack.
' • Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter- (not supplied) for sound reproduction via all internal loudspeakers,
...... IN
i_iiii_ _i!!iil
iii_!!!iiii
_;:;iiiii:_>;>'¸_¸¸¸.........................!
YPbPr
AUDIO L/R
........_ii¸
OUT
OUT
/ :\
DVD / Set top box
32 EN
To Next Page
Loading...
