24
Skip channels
1 Press ( Home).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The» [Analogue: Manual] menu appears.
3 Press to select and enter [Skip
channel].
4 Press to select [Yes] and press OK to
skip current channel.
The selected channel is skipped when »
you press P +/- on your remote
control or view the channel grid.
5 Press ( Home) to exit.
Note
You can restore a skipped channel to your •
channel listing .
Rename channels
You can rename channels. The name appears
when you select the channel.
1 When watching TV, press OK to display
the channel grid .
2 Select the channel you want to rename.
3 Press OPTIONS.
The channel options menu appears.»
4 Press to select and enter [Rename
chan.].
A text input box appears.»
5 Press to select characters.
6 Press OK to confi rm each of the
characters.
Tip
Rename channels - a channel name can be up •
to six characters long.
Press
• [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
Change the channel number
1 Press ( Home).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The» [Analogue: Manual] menu appears.
3 Press to select and enter
[Channel number].
The screen displays the channel that »
you are watching.
4 Press to change the channel number.
5 Press OK to confi rm.
6 Press to select [Store new channel]
to store channel number.
7 Press to enter [Store new channel].
8 Press OK to store the new channel.
9 Press ( Home) to exit.
Fine-tune analogue channels
1 Press ( Home).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The» [Analogue: Manual] menu appears.
3 Press to select and enter [Fine-
tune].
4 Press to adjust frequency.
5 Press OK to confi rm.
6 Press to select [Store cur. chan.] to
store channel number.
7 Press to enter [Store cur. chan.].
8 Press OK to store the current channel.
9 Press ( Home) to exit.
EN
To Next Page
Loading...
