20
6 Press ( Home ) to exit.
Step 2 Search and store new TV
channels
1 Press ( Home ).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Manual install] .
The [Manual install] menu appears.
3 Press to select and enter [Search] .
4 Press or use Numeric buttons to
manually enter the three digit frequency.
5 Press OK to begin search.
6 Press when the new channel is found.
7 Press to select [Store new channel]
to store the new channel under a new
channel number.
8 Press to enter [Store new channel] .
9 Press to select [Yes] and press OK to
store the new channel.
10 Press ( Home ) to exit.
Rename channels
Channels can be renamed so that a name of
your choice appears whenever the channel is
selected.
1 When watching TV, press OK to display
the channel grid .
2 Select the channel you want to rename.
3 Press OPTIONS .
The channel options menu appears.
4 Press to select [Rename chan.] .
5 Press to select a character and press
to add another character.
6 Select [Done].
7 Press OK .
»
»
6 Install channels
The rst time you setup your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
reinstall and ne tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
1 Press ( Home ).
2 Select [Installation] > [Channel install.]
> [Channel assistant] .
3 Press OK .
4 Follow the on-screen instructions to
install channels.
Manually install channels
This section describes how to search and store
analog TV channels manually.
Step 1 Select your system
Note
Skip this step if your system settings are
correct.
•
1 Press ( Home ).
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Manual install]
The [Manual install] menu appears.
3 Press to select and enter [System] .
4 Press to select your country or
region.
5 Press OK to con rm.
»
EN
To Next Page
Loading...
