Philips 32PHA4509 - 3 Your TV; Control Panel; Remote Control

English
5
EN
Remote Control
a
(Standby)
Switch the TV on or to standby.
b
Play buttons
Control video or music.
c
FORMAT
Change picture format.
d
TV
Switch source to watch TV.
3 Your TV
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
Control Panel
1
2
3
4
5
a
Volume-: When there is no keyboard
menu, lower the volume function;When
the keyboard menu appears, move the
appropriate options to the left / right.
b
Volume+: When there is no keyboard
menu, improve the volume function; when
the keyboard menu appears, move the
appropriate options to the left / right.
c
Channel
+
: When there is no keyboard
menu, switch to the next channel function;
when the keyboard menu appears, move
up and down the appropriate options.
d
Channel-: When there is no keyboard
menu, switch to the prior channel function;
when the keyboard menu appears, move
up and down the appropriate options.
e
Signal source/OK: In standby status,the
signal source / OK key is used as a power
key, press this key to boot.
After booting, the menu signal source /
OK is used to open the keyboard menu
functions.When the keyboard menu is
open, the signal source / OK is used as a
confirm key.
Note: The control panel on the smart TV
and the web browser has no effect,the
source / OK key under USBhas no effect.