Philips 8000 Series - Edit a Record; Set the Personalized Melody; Set the Speed Dial Keys

21EN
• select [Menu]. Press / to select ,
then press [OK] to conrm.
2 Select [Option] > [Add new], then press
[OK] to conrm.
3 Enter the name, then press [OK] to
conrm.
4 Enter the number, then press [Save] to
conrm
» Your new record is saved.
Tip
• If your phonebook memory is full, the handset displays
a notication message. Delete some records to add
new ones.
• Press and hold to insert a pause.
• Press to switch between the uppercase and
lowercase letters.
Note
• The phonebook overwrites the old number with the
new number.
• Press [Clear] to delete the character.
• Press / to move the cursor left and right.
Edit a record
1 There are two ways to access the
phonebook list:
• press ;
• select [Menu]. Press / to select ,
then press [OK] to conrm.
2 Select [Option] > [Edit], then press [OK]
to conrm.
3 Edit the name, then press [OK] to conrm.
4 Edit the number, then press [Save] to
conrm.
» The record is saved.
Set the personalized melody
You can personalize the melody played when
someone in the phonebook calls you.
Note
• Make sure you have subscribed to caller identication
before you use this feature.
1 There are two ways to access the
phonebook list:
• press ;
• select [Menu]. Press / to select ,
then press [OK] to conrm.
2 Select a contact, then press [Option] >
[Select melody].
3 Press [OK] to set or change the melody
for the contact.
4 Select a melody for the contact, then press
[OK] to conrm.
» The melody is set.
Set the speed dial keys
You can assign and save the number of your
contact to a key. Then you can press and hold
on the key in standby mode to dial the saved
phone number automatically.
1 There are two ways to access the
phonebook list.
• press ;
• select [Menu]. Press / to select ,
then press [OK] to conrm.
2 Select a contact, then press [Option] >
[Speed dial], then press [OK] to conrm.
3 Press / to select and assign the
contact to an available location, then press
[OK] to conrm.
» The speed dial key is set.