Philips 8000 Series - Set the Key Tone; Set the Battery Tone; Set the Docking Tone; Set the Sound Profile

31EN
2 Press / to select , then press [OK]
to conrm.
3 Select [Silent mode], then press [OK] to
conrm.
4 Select [Exception], then you can select
from these two options:
• Select [On] to activate, or [Off] to
deactivate the silent mode, then press
[OK] to conrm.
• Select [Ring delay], then select an
option.
5 Press [OK] to conrm.
» The setting is saved.
Note
• If [Exception] is set to [On] and [Ring delay] option
is selected, the handset rings only after length of ring
delay selected is reached.
• Make sure that the contact under the [Set exception]
option of the phonebook menu is set to [On] before
you can exclude this contact from the silent mode.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Key tone], then press [OK] to
conrm.
4 Select [On]/[Off], then press [OK] to
conrm.
» The setting is saved.
Set the battery tone
Battery tone is the sound made when the
battery is low and needs recharging.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Battery tone], then press [OK] to
conrm.
4 Select [On]/[Off], then press [OK] to
conrm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Docking tone], then press [OK] to
conrm.
4 Select [On]/[Off], then press [OK] to
conrm.
» The setting is saved.
Set the sound prole
You can set the sound in the earpiece or
handsfree mode among 3 different proles.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [MySound], then press [OK] to
conrm.
4 Select a prole, then press [OK] to
conrm.
» The setting is saved.
Access the sound prole during a call
Press [Sound] for once or several times to
change the sound prole during a call.