45EN
21 Frequently
asked questions
No signal bar is displayed on the screen.
• The handset is out of range. Move it closer
to the base station.
• If the handset displays [Register your
Handset], put the handset on the base
until the signal bar appears.
Tip
• For further information, see 'Register additional
handsets' on the Services section.
My handset is in searching status, what do I
do?
• Make sure that the base station has power
supply.
• Register the handset to the base station.
• Move the handset closer to the base
station.
If I fail to pair (register) additional handsets to
the base station, what do I do?
Your base memory is full. Unregister the unused
handsets and try again.
I have chosen a wrong language which I cannot
read, what do I do?
1 Press to go back to the standby screen.
2 Press to access the main menu screen.
3 Press / to select , then you see one
of the following texts appear on the screen:
Taal
Language
Sprache
Langue
Lingua
Γλώσσα
Idioma
4 Select it to access the language options.
5 Select your own language.
No dialing tone
• Check your phone connections.
• The handset is out of range. Move it closer
to the base station.
To Next Page
Loading...
